To Next PageTo Next PageHow to fix Health O Meter 597KL that won't turn on?
If your Health O Meter Scales won't turn on, the first thing to check is the batteries. If they are dead, replace them following the instructions on page 13. Also, try using a different electrical outlet to rule out a faulty outlet. If you use an adapter, check the LED light at the back of the display module to see if the adapter is working; if not, replace it.
Why my Health O Meter 597KL shows questionable weight?
If your Health O Meter Scales displays questionable weight or fails to zero, it could be due to several reasons. First, check for any external objects interfering with the scale and remove them. Second, ensure the display showed 0.0 before weighing; if not, have the patient step off, zero the scale, and restart the process. Third, verify the scale is placed on a level floor. Finally, the scale might be out of calibration, so check the weight using a known weight value.
How to fix Health O Meter 597KL that does not turn on?
If your Health O Meter Scales isn't turning on, there are a few potential causes. First, the battery might be dead; replace it following the instructions on page 13. Second, the electrical outlet could be faulty; try using a different outlet. Third, there might be an issue with the power supply; check the LED light at the back of the display module to see if the adapter cord is working, and replace the adapter if necessary.
What to do if Health O Meter 597KL do not turn on?
If your Health O Meter scales do not turn on, there are a few potential causes. First, the batteries may be dead, so try replacing them. Second, the electrical outlet could be faulty; try using a different outlet. Finally, the power supply might be bad; in this case, replace the adapter.
What to do if Health O Meter 597KL display shows “OVER”?
If your Health O Meter Scales display shows “OVER”, it means the load on the scale exceeds its capacity (600 lb / 272 kg). Remove the excess weight to continue using the scale within its specified limits.
What to do if Health O Meter 597KL Scales displays “OVER”?
If your Health O Meter Scales displays “OVER”, it means the load on the scale exceeds its capacity of 600lbs. You should remove the excess weight to ensure you are using the scale within its specified limits.
What to do if Health O Meter 597KL display shows “LO Bat” message?
If the display on your Health O Meter scales shows a “LO Bat” message, it means the batteries are dead. Replace the batteries according to the provided instructions.
How to fix Err 5 on Health O Meter 597KL Scales?
Err 5 on Health O Meter scales means calibration is disabled. Toggle the calibration switch to enable it.
Why Health O Meter 597KL show questionable weight or do not zero?
If your Health O Meter scales are showing a questionable weight or not zeroing, consider these possibilities: First, an external object might be interfering with the scale; remove any such objects. Second, the display may not have shown ‘000.00’ before weighing; in this case, have the patient get off the scale, zero it, and begin the weighing process again. Third, the scale might not be on a level floor; place it on a level surface and restart the weighing process. Finally, the scale may be out of calibration; check the weight with a known weight value.
What does Err 6 mean on Health O Meter Scales?
Err 6 on Health O Meter scales indicates a high saturation state (high A/D). This means the load cell is not connected correctly. Check the connection, cables, and mechanical connection. If the problem persists, replace the set of load cells.
General| Brand | Health O Meter |
|---|---|
| Model | 597KL |
| Category | Scales |
| Language | English |
