To Next PageTo Next PageHow to center the walking belt on a Healthrider H97t Treadmill?
If the walking belt on your Healthrider Treadmill isn't centered: if it has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn; if it has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn.
How to fix Healthrider H97t if the power does not turn on?
If your Healthrider Treadmill isn't turning on, ensure the power cord is securely plugged into a properly earthed outlet. Also, verify that the key is correctly inserted into the console. If the power switch has tripped (protrudes), wait five minutes, then press it back in to reset.
What to do if Healthrider H97t power turns off during use?
If your Healthrider Treadmill shuts off during use, first check the power switch. Ensure the power cord is properly plugged in; if it is, unplug it, wait five minutes, then plug it back in. Also, try removing and reinserting the key from the console.
How to fix Healthrider Treadmill walking belt that slips?
If the walking belt on your Healthrider Treadmill slips when you walk on it, use the hex key to turn both idler roller screws clockwise, 1/4 of a turn.
Why does Healthrider H97t Treadmill walking belt slow down when walked on?
If the walking belt on your Healthrider Treadmill slows down when you walk on it: * Ensure you are using an appropriate extension cord, if needed: a 3-conductor, 14-gauge (1 mm[2]) cord no longer than 5 ft. (1.5 m). * If the walking belt is overtightened, use the hex key to turn both idler roller screws counterclockwise, 1/4 of a turn.
How to turn off demo mode on Healthrider Treadmill?
If the console displays on your Healthrider Treadmill stay lit even after you remove the key, the demo mode is likely turned on. To disable it, hold down the Stop button for a few seconds.
What to do if Healthrider H97t console display is not working?
If the console displays on your Healthrider Treadmill aren't working correctly, remove the key and unplug the power cord. Ensure the gap between the Magnet and the Reed Switch is about 1/8 in. (3 mm). Adjust the Reed Switch by loosening the #8 x 3/4" Truss Head Screw, moving the switch slightly, and retightening the screw. Then, run the treadmill for a few minutes to check if the speed reading is correct.
General| Motor Power | 3.0 CHP |
|---|---|
| Running Area | 20" x 60" |
| Programs | 32 Workout Apps |
| Folding | Yes |
| Dimensions | 81.1" L x 35.6" W x 69.7" H |
| Foldable | Yes |
| Incline | 0-15% |
| Display | 7" Backlit Display |
Steps to connect the power cord to the treadmill and outlet safely and correctly.
Guide to operating the treadmill using manual controls for speed and incline.
Instructions for connecting and using audio devices with the console's speakers.
Information about the benefits and use of the optional chest heart rate monitor.
How to change measurement units (miles/kilometers) on the console.
Instructions for turning the console's demo mode on or off.
Adjusting the console display's contrast level for better visibility.
Turning the personal trainer's voice guidance feature on or off.
Setting the preferred default console menu upon startup.
Checking the status and details of the iFit Live module's Wi-Fi connection.
Sending and receiving workout data and updates with iFit Live.
Step-by-step instructions for folding the treadmill for storage.
Steps for safely moving the folded treadmill to a new location.
Instructions for unfolding the treadmill from its storage position.
Steps to resolve issues when the treadmill fails to power on.
How to turn off the demo mode when the console stays lit.
Troubleshooting steps if the treadmill shuts off unexpectedly during operation.
Steps to fix console display malfunctions or errors.
Procedure to calibrate the incline system if it's not functioning properly.
Diagnosing and fixing issues with the walking belt speed when under load.
Steps to adjust and center the walking belt between the foot rails.
How to tighten the walking belt to prevent slippage during use.
Adjusting console contrast to fix display issues like lines or poor visibility.
Guidance on maintaining optimal heart rate zones for fat burning and aerobic exercise.
Recommendations for warming up, training zone exercise, and cooling down.
