To Next PageTo Next PageWhat to do if the Healthrider Treadmill power does not turn on?
First, ensure the power cord is correctly plugged into a surge suppressor, and the surge suppressor is plugged into a grounded outlet. Also, make sure the key is properly inserted into the console. Finally, check the power switch located on the treadmill frame near the power cord. If the switch protrudes, wait five minutes, then press it back in to reset it.
What to do if Healthrider H50 Crosswalk Sl Treadmill walking belt slows when walked on?
If the walking belt is overtightened, remove the key and unplug the power cord. Use the hex key to turn both idler roller screws counterclockwise, 1/4 of a turn.
How to fix Healthrider Treadmill walking belt that is off-center or slips?
If the walking belt has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn. If the walking belt has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn.
How to stop Healthrider Treadmill upperbody arms squeaking?
Turn the resistance knob counterclockwise and remove it. Next, remove the resistance cone and the upper body arm, along with other related parts. Apply a thin layer of white marine grease to the outer surface of the resistance cone.
Why does my Healthrider H50 Crosswalk Sl power turn off during use?
The treadmill might be turning off during use due to a tripped power switch. Check the power switch. Also, ensure the power cord is securely plugged in; if it is, unplug it, wait five minutes, and plug it back in. Another potential solution is to remove and reinsert the key from the console.
What to do if Healthrider Treadmill console displays remain lit after removing the key?
To turn off the demo mode, hold down the Stop button for a few seconds.
What to do if Healthrider H50 Crosswalk Sl Treadmill incline does not change correctly?
Hold down the Stop button and the Speed increase button, insert the key into the console, and then release the Stop button and the Speed increase button. Press the Stop button and then press the Incline increase or decrease button.
Why do the Healthrider Treadmill console displays not function properly?
Remove the key from the console and unplug the power cord. Next, remove the five indicated #8 x 3/4" Screws. Locate the Reed Switch and the Magnet on the right side of the Pulley. Turn the Pulley until the Magnet is aligned with the Reed Switch, ensuring the gap between them is about 1/8 inch (3 mm).
General| Programs | 12 |
|---|---|
| Heart Rate Monitoring | Yes |
| Folding | Yes |
| Foldable | Yes |
| Running Area | 50 x 140 cm |
| Decline | No |
| Maximum User Weight | 120 kg |
| Display | LCD |
| Running Surface | 50 x 140 cm |
| Weight Capacity | 120 kg |
| Motor Power | 2.5 HP |
| Motor | 2.5 HP |
Provides contact details for questions, support, and warranty registration.
Highlights critical safety warnings and cautions for treadmill operation.
Essential safety rules for using the treadmill, including user responsibility and environment.
Diagram and labels identifying key parts of the treadmill.
Visual guide to screws, washers, and other small parts used in assembly.
Steps for unpacking, preparing the base, and connecting the upright wire.
Procedure for attaching the right upright and securing it to the base.
Steps for attaching the left upright and fitting upright covers.
Steps for assembling the console and attaching the handrails.
Finalizing console connection and securing handrails with screws.
Procedure for attaching upper body arms and their respective covers.
Installing the latch housing and performing final tightening and checks.
Guidelines for connecting the power cord and using surge suppressors.
Description of console display, buttons, workouts, and iFit compatibility.
How to track workout progress and measure heart rate.
Step-by-step guide for selecting and performing a calorie-focused workout.
Step-by-step guide for selecting and performing a performance-focused workout.
Instructions for using iFit workout cards with the console.
Instructions on how to safely fold and lower the treadmill.
Guidance on safely transporting the treadmill after folding.
Solutions for issues like no power, persistent displays, or malfunctioning console.
Troubleshooting for incline not changing and walking belt slowing.
Resolving issues with off-center or slipping belts and upper body arm squeaks.
Guidance on determining proper exercise intensity using heart rate zones.
Recommendations for workout duration, warm-up, cool-down, and exercise frequency.
