Healthstream Columbia

Questions and Answers

R
rodriguezchristineAug 2, 2025
What to do if Healthstream Columbia shows current overload protection error?
- S
  scott71Aug 2, 2025
  If your Healthstream Treadmill displays an error code of “E3” and the other windows are blank due to an overload or electrical surge, the machine has entered self-preservation mode. After 10 seconds, the treadmill will enter ready mode and can be restarted. Check for any burning smells coming from the motor. Also, verify that all wires are correctly connected.
J
Jacob KingAug 9, 2025
Why does my Healthstream Columbia Treadmill show explosion-proof protection error?
- N
  Natalie McclainAug 9, 2025
  The Healthstream Treadmill shows an “E6” code and buzzes 9 times due to insufficient power or voltage, or a faulty controller, triggering start and stop fault status. To resolve this, allow the treadmill to enter ready mode and restart it. Ensure all wires are connected correctly.
H
hodgescraigAug 16, 2025
What to do if Healthstream Columbia Treadmill has no speed wireless sensor network?
- L
  lyonsbrandonAug 17, 2025
  If your Healthstream Treadmill displays code E2 and the other windows are blank, it indicates a lack of speed wireless sensor network. After 10 seconds, the treadmill will enter ready mode, allowing you to restart it. Ensure that the sensor plug and the motor connecting wire are correctly connected to the controller.
A
Alexis MillerAug 25, 2025
What to do if Healthstream Columbia has console self-learing fault?
- C
  Christopher RuizAug 25, 2025
  If your Healthstream Treadmill experiences a console self-learning fault, indicated by the computer buzzing 9 times and displaying the “E6” OR "E8" code on the screen, it may be due to poorly welded parts on the console. Replace the console directly.