EasyManua.ls Logo

Heat Controller VMH24SC-1 - Troubleshooting; Safety Precautions for Troubleshooting

Heat Controller VMH24SC-1
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
Heat Controller, Inc. VMH SerieS Service Manual
34
8.4.11.2 After the A/C is turned on, the Clean Air function is switched on when the A/C receives FRESH
CODE the first time, and ionizer is switched off when the A/C receives the CODE again. 8.4.11.3 After
starting the Clean Air function, the ionizer will work only when the indoor fan motor is running. If the indoor
fan motor is off, the ionizer also stops working, even though the Clean Air function is available.
8.4.11.4 Switching the run mode will not stop the ionizer. When turning off the A/C, the ionizer is also turned
off.
9. Troubleshooting
Safety
Because of there are capacitors in PCB electrical power is stored in the capacitors, do not forget to discharge the
capacitor.
Electrolytic Capacitors
(HIGH VOLTAGE! CAUTION!)
Bulb (25-40W)

Related product manuals