Heathkit HA-14 - Technical Specifications

HMATHEIT"
SERVICE
INFORMATION
SERVICE
If,
after
applying
the
information
in
this
manual
and
your
best
efforts,
you
are
still
unable
to
obtain
proper
performance,
it
is
suggested
that
you
take
advantage
of
the
technical
facil-
ities
which
the
Heath
Company
makes
avail-
able
to
its
customers,
The
Technical
Consultation
Department
is
main-
tained
for
your
benefit,
This
service
is
available
to
you
at
no
charge,
Its
primary
purpose
is
to
provide
assistance
for
those
who
encounter
difficulty
in
the
construction,
operation
or
maintenance
of
HEATHKIT
equipment,
It
is
not
intended,
and
is
not
equipped
to
function
as
a
general
source
of
technical
information
involving
.
Kit
modifications
nor
anything
other
than
the
.
normal
and
specified
performance
of
HEATHKIT
$
equipment,
Although the Technical Consultants are familiar
with all details of this kit, the effectiveness of
heir advice will depend entirely upon the amount
and the accuracy of the information furnished by
you, Ina sense, YOU MUST QUALIFY for GOOD
technical advice by helping the consultants to
help you, Please use this outline:
1, Before writing, fully investigate each of the
hints and suggestions listed in this manual
under In Case Of Difficulty, Possibly it
will not be necessary to write,
2, When writing, clearly describe the nature
of the trouble and mention all associated
equipment, Specifically report operating
procedures, switch positions, connections
to other units, and anything elise that might
help to isolate the cause of trouble,
8, Report fully on the results obtained when
testing the unit initially and when following
the suggestions under In Case Of Dif-
ficulty, Be as specific as possible and
include voltage readings iftest equipmentis
available,
4, Identify the kit Model Number and Series
Number, and date of purchase, if available,
Also mention the date of the kit assembly
manual, (Date at bottom of Page 1.)
5. Print or type your name and address,
preferably in two places on the letter,
With the preceding information, the consultant
will know exactly what kit you have, what you
would like it to do for you and the difficulty you
wish to correct, The date of purchase tells him
whether or not engineering changes have been
made since it was shipped to you, He will know
what you have done in an effort to locate the
cause of trouble and, thereby, avoid repeti-
tious suggestions, In short, he will devote full
time to the problem at hand, and through his
familiarity with the kit, plus your accurate
report, he will be able to give you a complete
and helpful answer, If replacement parts are
required, they will be shipped to you, subject
to the terms of the Warranty,
The Factory Service facilities are also available
to you, in case you are not familiar enough with
electronics to provide our consultants with suf-
ficient information on which to base a diagnosis
of your difficulty, or in the event that you pre-
fer to have the difficulty corrected in this man-
ner,
You
may
return
the
completed
equipment
to the Heath Company for inspection and neces-
sary repairs and adjustments, You will be
charged a minima’ service fee, plus the price
of
any
additional
parts
or
material
required,
However,
if
the
completed
kit
is
returned
within
the Warranty period, parts charges will be
governed
by
the
terms
of
the
Warranty,
State
the date of purchase, if possible,
Local Service by Authorized HEATHKIT Serv-
ice Centers is also available in some areas and
often will be your fastest, most efficient method
of obtaining service, HEATHKIT Service Centers
will honor the regular 90 day HEATHKIT Parts
Warranty on all kits, whether purchased through
a dealer or directly from the Heath Company;
however, it will be necessary that you verify
the purchase date of your kit,