Heathkit IG-18 - 240 VAC Wiring

Page 28
© @ @
~-~ -~ -,11-------------------1
8 ~
'bVO
PICTORIAL 15
UNIT ASSEMBLY
Refer to Pictorial 15 for the following steps.
In the next two steps, fasten the rear panel to
the chassis with two 6-32 x 3/8" screws, two
#6
lockwashers, one #6 solder lug, and two
6-32 nuts.
( ) Mount the cable clamp under the #6 hard-
ware at location X. See Detail 15A. Posi-
tion the cable clamp as shown in Pictorial
15.
Detail 15A
SCREW