Heatilator Novus ND3630 User Manual

02/04 4031-117 Rev I 1
INSTALLATION & OPERATING INSTRUCTIONS
NOVUS SERIES
DIRECT VENT GAS APPLIANCE
ND3630/3933/4236/4842
WARNING!
Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to this
manual. For assistance or additional information, consult a qualified installer, service agency or the gas supplier.
For residential use - Meets all HUD requirements for
manufactured housing installations.
CAUTION:
Do not expose the appliance to the elements (such as rain, etc.).
WARNING!
The fixed glass panel on the front of this appliance is extremely hot while it is in operation and for one hour after it has been
shut off. A secondary barrier has been provided to prevent direct contact with the fixed glass panel. Do not operate this
appliance with the barrier removed.
WARNING: If the information in this manual
is not followed exactly, a fire or explosion may
result causing property damage, personal in-
jury or loss of life.
 Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
 What to do if you smell gas
 Do not try to light any appliance.
 Do not touch any electrical switch; do not use
any phone in your building.
 Immediately call your gas supplier from a
neighbors phone. Follow the gas suppliers
instructions.
 If you cannot reach your gas supplier, call the
fire department.
 Installation and service must be performed by a
qualified installer, service agency or the gas
supplier.
Note: An arrow (Æ) found in the text signifies change in content.

Heatilator Novus ND3630 Specifications

General

Type	Direct Vent Gas Fireplace
Fuel Type	Natural Gas or Propane
Efficiency	Up to 70%
Venting	Direct Vent
Firebox Material	Steel
Log Set Material	Ceramic Fiber

Summary

A. APPLIANCE SPECIFICATIONS

1. U.S. And Canada Certification

Details certifications for US and Canadian markets for the appliance.

B. LOCATIONS AND CLEARANCES

1. Appliance Dimensions

Provides dimensional data for different appliance models.

Clearances to Combustible Materials

Details required clearances to combustible materials around the appliance.

F. VENTING - HORIZONTAL TERMINATION

Termination Cap Location Requirements

Illustrates requirements for termination cap placement and clearances.

Dimension Descriptions and Clearances

Details various dimensional clearances required for vent termination and appliance placement.

G. VENTING - VERTICAL TERMINATION

1. Rear Vent Clearances

Specifies clearances for rear vertical vent termination.

Vent Lengths

Shows maximum vent lengths for various rear vertical termination configurations.

Top Vent Clearances

Specifies minimum clearances for top vertical vent termination.

Top Vent Vent Lengths

Details maximum vent lengths for various top vertical termination configurations.

H. VENTING - FRAMING & CONSTRUCTION

Vent Termination and Cap Installation

Guidelines for terminating vents and installing termination caps.

I. UTILITIES

1. High Altitude Installation

Adjustments for installing the appliance at high altitudes in the US and Canada.

2. Gas Line Connection

Procedures for connecting the gas supply line, including valve and flexible connector details.

4. Fuel Conversion

Explains fuel conversion requirements and necessary kits.

Standing Pilot Ignition Wiring

Wiring details and diagram for standing pilot ignition systems.

Intermittent Pilot Ignition Wiring

Details and diagram for intermittent pilot ignition systems.

L. DETERMINING THE IGNITION TYPE

Determine Ignition Type

How to identify if the appliance has intermittent or standing pilot ignition.

M. LIGHTING INSTRUCTIONS

Intermittent Pilot Ignition Lighting

Safety warnings and lighting instructions for intermittent pilot ignition.

Standing Pilot Ignition Lighting

Safety warnings and detailed steps for lighting a standing pilot.

O. START-UP ISSUES

Common Start-up Issues and Solutions

Lists common issues like condensation, blue flames, and odors with their solutions.

P. MAINTENANCE INSTRUCTIONS

1. Annual Maintenance

Importance of annual inspection and tuning by a qualified technician.

3. Check Flame Patterns

How to check and adjust flame patterns for correct operation.

Gas Appliance (Fireplace) Limited Lifetime Warranty

Limited Lifetime Warranty Details

Details the limited lifetime warranty for component failure due to manufacturing defects.

1 Year Limited Warranty Coverage

Outlines the one-year warranty for various appliance components.

Warranty Conditions and Limitations

Lists conditions, exclusions, and limitations applicable to the warranties.

How to Obtain Service