To Next PageTo Next Page
Need help?Do you have a question about the Heatilator NOVUS GNBC36 and is the answer not in the manual?
General| Brand | Heatilator |
|---|---|
| Model | NOVUS GNBC36 |
| Category | Indoor Fireplace |
| Language | English |
Details certification standards and compliance for North America.
Emphasizes compliance with local, national, and industry codes.
Discusses tempered glass specifications and certifications for safety.
Discusses where the appliance can be located, including bedroom/bathroom rules.
Details required clearances to combustible materials around the appliance.
Specifies minimum vent height requirements and horizontal run limitations.
Details how to assemble vent sections and use elbows.
Explains framing openings and installing firestop spacers.
Specifies minimum vent heights for various roof pitches.
Describes how to test the venting system using a match.
Details the benefits and installation of an outside air kit for combustion.
Adjustments for input rating based on elevation above sea level.
Proper connection of gas supply lines and pressure testing requirements.
Information on optimum gas pressure and tap locations.
Instructions on fuel type conversions and approved conversion kits.
Covers wiring, pilot systems, and junction box installation procedures.
Defines materials that can ignite and burn, including drywall.
Defines materials that will not ignite and burn, used for safety.
Specifies sealants for closing gaps and preventing air leaks.
Instructions for attaching the hood above the glass panel.
Steps for removing upper grille and control access panels.
Procedures for glass/screen removal and replacement references.
Covers log set assembly, lava rock/vermiculite, and rock wool for embers.
Safety instructions and step-by-step guide for lighting intermittent pilot systems.
Safety information and step-by-step guide for lighting standing pilot systems.
Recommendations for leaving the pilot on and lighting during use.
Procedures for lighting and shutting down intermittent pilot systems.
Information on fuel type conversions and necessary kits.
Cause and expected disappearance of condensation.
Normal operation characteristic, flames may yellow.
Initial odor due to paint curing and manufacturing oils.
Normal result of curing process, cleaning advice provided.
Annual cleaning of burner and controls for longevity.
Visual checks for steady flames, correct color, and sensor coverage.
Annual inspection of venting system for obstructions.
Instructions for cleaning the glass, safety notes, and replacement parts.
Steps for removing and reinstalling the log set.
Fan motor rheostat and automatic blower controls.
Various remote control options for appliance operation.
Optional fan kits for different appliance sizes.
A versatile wall switch for appliance control.
Recommended kit for providing outside combustion air.
Controls for adjusting flame height based on fuel type.
Different door styles for appliance aesthetics.
Kits for converting standing pilot to natural gas or propane.
Kits for converting intermittent pilot to natural gas or propane.
Various trim kits for appliance finishing.
Specific trim kit for the bay door style.
Decorative surround for tile installation.
Replacement upper grille parts for different sizes.
Replacement hood parts for different sizes.
Replacement screen assemblies for different sizes.
Replacement glass panels with frames for different sizes.
Replacement lower grille parts for different sizes.
Replacement log sets for 30" and 33/36" models.
