11
5.0 EXPLANATION TO USER
Following Installation and Commissioning of the water heater the operation should
be fully explained to the user.
5.1 HOT WATER
1. Indicate the location of the water heater and identify the outlets to which it
is connected.
2. Explain how to adjust the temperature and conrm whether the temperature
is locked or not.
3. Explain that the water in the Streamline will expand during heating causing
the tap to drip. This is normal and is not a fault with the Streamline.
5.2 SYSTEM MALFUNCTION
1. Explain how to isolate electrical and water supplies in case of a fault.
2. Explain that a qualied plumber and/or electrician should be contacted if
there is a fault.
3. Explain how to identify/check basic faults.
5.3 SYSTEM MAINTENANCE
Explain the necessity to carry out regular maintenance of the water heater to
ensure its continued safe and efcient operation.
5.4 LITERATURE
Leave the Fitting Instructions with the user.
To Next Page
Loading...
Need help?
General
