EasyManua.ls Logo

hecht 540 - Brake Handle; To Stop Engine; Mowing

hecht 540
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28 / 48
PL
SK
DE
EN
CS
HU
CAUTION! A
Do not allow the starter grip to snap back against the engine. Return it gently to
prevent damage to the starter.
CAUTION! A
Rapid retraction of starter cord (kickback) will pull hand and arm toward engine
faster than you can let go. Broken bones, fractures, bruises or sprains could result.
5. Return the starter handle slowly to the rope guide bolt after engine starts.
6. Release the stop control handle to stop the engine and blade quickly if necessary.
Do not tilt the lawn mower when starting the engine. Start the mower on a level surface,
free of high grass or obstacles.
Do not start the engine when standing in front of the discharge opening.
BRAKE HANDLE
CAUTION! A
In order to avoid any unintentional start-ups of the lawn mower, it comes equipped
with an engine brake.
The engine brake is a basic safety feature of the mower. When the brake lever is released,
the engine and the blades must automatically stop. The deceleration time depends
on the condition and wear of the brake. If the brake doesn’t work properly, contact an
authorised service centre.
Before mowing, you should check the brake function several times to make sure everything
is in correct working order.
C During operation, hold the handle and the brake control lever firmly. If you release
the brake lever during the machine’s operation, the engine stops.
TO STOP ENGINE
1. Releasing the brake control lever stops the engine and also the blade.
2. Disconnect and ground the spark plug wire to prevent the mower from accidentally starting
if it’s left unattended for a long period of time.
MOWING
WARNING! B
Before performing any of the steps described in the following steps, always stop
the engine and wait for the blade to stop rotating. In a case where it’s necessary to
reach into the work area of the stopped blade, it’s necessary to secure the engine
against accidental starting (e.g. by pulling the cable end of the spark plug).
THIS WARNING WON’T BE REPEATED IN THE FOLLOWING STEPS.

Related product manuals