OPERATION
1. Filling the Engine oil
1.1 Remove the dipstick (Figure 8)
tube until the oil level reached the
1.3 Install the dipstick securely.
Attention!
yearly thereafter. Refer to changing the Engine oil .
Attention!
from gasoline can burn you and others.
• To prevent a static charge from igniting the gasoline, place the container and/or
• Fill the tank outdoors when the engine is cold. Wipe up spills.
• Store gasline in an appoved fuel container, out of the reach of children.3.
3. Checking the Engine oil level
3.1 Remove the dipstick,wipe it clean,
and fully install the dipstick.
Figure 9.
3.2 Remove the dipstick and check
the oil level(Figure 9). If the oil
level is below the Add mark on the
3.3 Install the dipstick.
Adjusting the cutting height.
Attention! Adjusting the cutting height may bring you into contact with the
moving blade, causing serious injury.
• Stop the engine and wait for all moving parts to stop.
Attention! If the engine has been running,the muffler will be hot and can
To Next Page
Loading...
