30 / 44
PL
SK
DE
EN
CS
HU
CARE AND MAINTENANCE
CAUTION! A
To ensure proper functioning of the machine, it is necessary to have it checked and
adjusted by qualified personnel in an authorized service centre at least once a year.
Proper maintenance is essential for safe, economic and trouble-free operation of
the machine.
Failure to follow the maintenance instructions and safety precautions may cause serious injury
or death. Always follow the procedures, safety precautions, recommended maintenance and
recommended checks mentioned in this manual.
WARNING! B
Prior to any work on the machine (maintenance, inspection, replacement of
accessories, servicing) or before storing it, ALWAYS SWITCH THE ENGINE OFF, wait
for all moving parts to stop and allow the machine to cool down. Prevent the engine
from being started accidentally. Disconnect the spark plug.
THIS WARNING IS NOT REPEATED IN ANY FOLLOWING POINTS!
Keep this recommendation about checks, maintenance and intervals stated in this users guide.
Others service operations, which are more complicated, or it needs special tools, let it on our
authorized service.
INSPECTION AND MAINTENANCE SCHEDULE
FREQUENCY MAINTENANCE REQUIRED
Daily • Remove dirt and debris from the blower exterior.
• Inspect the engine, tank, and hoses for possible leaks, and repair as
necessary.
• Inspect the engine cooling fins for accumulation of dirt or debris, and clean
as necessary.
• Inspect the entire machine for damage, loose or missing components or
fastenings, and repair as necessary.
Every 10 hours • Clean and moisten with oil air filter.
Every10/15 hours • Check spark plug condition and gap.
Every 50 hours • Inspect the entire machine and tubes for damage, including loose or missing
components, and repair as necessary.
• Check spark plug condition and gap.
• Check fuel filter.
Periodically • Clean the spark arrestor screen.
To Next Page
Loading...
