Technical Data ABC
5–20 Edition September 2005
Disposal Instructions for Chiller P107-13188
The chiller comprises several components that must
be disposed of separately. Disposal of the unit must be
done professionally and only at appropriately desig-
nated locations.
The chiller can be divided into three groups.
1. Electrical parts, components, all cable types can be
dismantled and the single material items can then be
recycled. Electrical parts and components can be dis-
posed of directly at recycling centers.
2. Unusable residue (plastics, insulating material, sheet
metal parts, etc.) can be disposed of as household
waste or at recycling centers.
3. The refrigeration circuit may only be dismantled by
refrigeration specialists.
4. Dirty cooling water or cooling water with additives
must not enter the sewerage system or waters. Cool-
ing water is classified as hazardous waste and may
only be disposed of at an authorized company or recy-
cling center.
Attention: All waste must be disposed of in compli-
ance with the environmental protection regulations!
3
To Next Page
Loading...
Need help?
General
