- isolate.
- secure against reactivation.
- check absence of voltage.
- ground and short-circuit.
- cover or block off live parts in the vicinity.
Reactivation is carried out in reverse order.
● Knowledge
of the general and special safety reg‐
ulations and accident prevention regulations.
● Knowledge of the relevant electrotechnical regu‐
lations e.g. checks associated with commission‐
ing and the requirements for operating facilities,
rooms, and special types of equipment - power
supply for electric vehicles.
● Ability to recognize risks and to avoid potential
hazards.
When installing and handling the charging system, the
user, the operator, and the electrician must comply
with the national regulations on safety and accident
prevention.
Improper use and non-compliance with the operating
manual may jeopardize:
● your life
● your health
● charging system and vehicle.
Safety devices on the charging system
● must not be removed,
● must not be manipulated,
● must not be bypassed,
● before each use, it must be checked that the
equipment (e.g. housing, connecting line, charg‐
ing coupler) is undamaged,
● must be repaired or replaced as necessary, in
order to preserve the functional properties.
Ensure that:
● safety identifications, e.g. yellow-colored marks,
● danger signs and
● safety lights
remain easily visible and retain their effectiveness.
● When operating the charging system, do not use
any extension cables, cable reels, multisocket
power strips, or travel adapters.
● Do not insert any objects into the charging cou‐
pler of the charging system.
● Protect the socket-outlets and plug-in connec‐
tions against moisture and water or other liquids.
● Never immerse the charging system or the charg‐
ing coupler in water or other liquids.
● Do not disconnect the charging coupler from the
vehicle during charging.
Safety instructions
A.1.2 00.999.3046/
To Next Page
Loading...
