26
PL 6000 PLC input/output systems with HSCI
PL 6000
The PLC inputs and outputs are available via external modular
PL 6000 PLC input/output systems. They consist of a basic
module and one or more input/output modules. A total maximum
of 1000 inputs/outputs is supported. The PL 6000 units are
connected to the MC main computer via the HSCI interface. The
PL 6000 units are configured with the IOconfig PC software.
PLB 62xx
Basic modules
There are basic modules with HSCI interface available for 4, 6 or
8 I/O modules. Mounted on standard NS 35 rails (DIN 46 227 or
EN 50 022)
Supply voltage DC 24 V
Power consumption
1)
≈ 48 W at DC 24 V-NC
≈ 21 W at DC 24 V-PLC
Mass 0.36 kg (bare)
1)
PLB 6xxx completely filled, incl. TS, TT. For more details
regarding power supply for DC 24 V NC, see Power supply for
HSCI components.
System PL
•
Required once for each control system (except with UEC)
•
Includes connections for TS and TT touch probes, as well as TL
•
Safety-relevant inputs/outputs
•
12 free inputs, 7 free outputs
PLB 6204 For 4 I/O modules ID 591832-xx
PLB 6206 for 6 I/O modules ID 630054-xx
PLB 6208 For 8 I/O modules ID 630055-xx
Expansion PL
For connection to the system PL to increase the number of PLC
inputs/outputs
PLB 6104 For 4 I/O modules ID 591828-xx
PLB 6106 for 6 I/O modules ID 630058-xx
PLB 6108 for 8 I/O modules ID 630059-xx
Up to seven PLB 6xxx can be connected to the control.
To Next Page
Loading...
