64
Mounting information
Clearances and mounting
Proper minimum
clearance
When mounting the control components,
please observe proper minimum
clearances, space requirements, length
and position of the connecting cables.
Leave space for air circulation and servicing
Mounting
and electrical
installation
Keep the following in mind during mounting and electrical
installation:
•
National regulations for power installations
•
Interference and noise immunity
•
Operating conditions
•
Mounting position
Degrees of
protection
The following components fulfill the requirements for IP54 (dust
protection and splash-proof protection):
•
MANUALplus 620 (installed)
•
Machine operating panel (installed)
•
Handwheel
All electric and electronic control components must be installed
in an environment (e.g. electrical cabinet, housing) that fulfills
the requirements of protection class IP54 (dust and splash-proof
protection) in order to fulfill the requirements of contamination
level 2. All components of the OEM operating panel must also
comply with protection class IP 54, just like the HEIDENHAIN
operating panel components.
To Next Page
Loading...
