81
Other HEIDENHAIN controls
Examples
TNC 640
Information:
TNC 640 brochure
•
Contouring control for milling/turning machines and
machining centers
•
Up to 18 axes and closed-loop main spindle
•
HEIDENHAIN inverter systems and motors recommended
•
Uniformly digital with HSCI interface and EnDat interface
•
TFT color flat-panel display, 19-inch or 15-inch
•
Storage medium: HDR hard disk with 160 GB or SSDR solid
state disk with 32 GB
•
Programming in HEIDENHAIN conversational format or
according to DIN/ISO
•
Comprehensive cycle package for milling and turning operations
•
Constant surface speed for turning operations
•
Tool-tip radius compensation
•
Touch probe cycles
•
Free contour programming (FK)
•
Special function for fast 3-D machining
•
Short block processing time (0.5 ms)
CNC PILOT 640
•
Contouring control for lathes and turning-milling machines
•
Suitable for horizontal and vertical lathes as well as vertical
boring and turning mills
•
Up to 3 principal axes (X, Z and Y), B axis, closed-loop spindle
and counter spindle, C1/C2 axis and driven tools
•
5-axis simultaneous machining (X, Z, Y, B, and C axes)
•
Up to 3 programmable auxiliary axes (U, V, W) for control of
steady rest, tailstock and counter spindle
•
The position of a parallel secondary axis can be shown
combined with its principal axis
•
HEIDENHAIN inverter systems and motors recommended
•
Uniformly digital with HSCI interface and EnDat interface
•
TFT color flat-panel display, 19-inch or 15-inch
•
Data medium: CFR CompactFlash memory card (CFast):
•
Programming of turning, drilling and milling operations with
smart.Turn, according to DIN or via cycles
•
TURN PLUS for automated smart.Turn program generation
•
ICP free contour programming for turning and milling contours
•
For simple tool holders (multifix), turrets or magazines
To Next Page
Loading...
