47
Axes
Overview
The MANUALplus 620 is a contouring control for lathes with one
spindle and a slide (X, Z and Y) for tool movement. For rear-face
machining of the workpiece, an optional counter spindle can be
operated in addition to the main spindle.
The control can offset the display of movements in the Z axis with
those of its secondary axis W. Additional axes are available for
positioning steady rests and the tailstock.
The MANUALplus 620 is suitable for various machine
configurations, and supports horizontal as well as vertical lathes.
Some examples of machine configurations:
Display and
programming
Feed rate in
•
mm/min
•
mm/revolution
•
Feed rate override: 0 % to 150 %
•
Maximum feed rate at f
PWM
= 5000 Hz:
60000 rpm
.
Screw pitch [mm]
No. of motor pole pairs
Traverse range
–99 999.9999 to +99 999.9999 [mm]
The machine tool builder defines the traverse range. The user can
set additional limits to the traverse range if he wishes to reduce
the working space (software limit switch). A protection zone for
the spindle (Z–) can also be specified.
Tool carriers
The MANUALplus 620 supports quick change tool posts (multifix),
tool turrets and tool magazines. The tool carriers can be located in
front of or behind the workpiece.
To Next Page
Loading...
