HEIDENHAIN POSITIP 880 - INFO Screen; JOB SETUP Menu

POSITIP 880 83
I – 8 INFO Screen
I – 8 INFO Screen
JOB SETUP Menu
The JOB SETUP menu is accessed by pressing the INFO soft key the
JOB SETUP soft key and then ENT. See Fig. I.60. When in the JOB
SETUP menu, the following soft keys will be available:
 INSTALLATION SETUP
Press to begin accessing the INSTALLATION SETUP parameters.
 IMPORT/EXPORT Press to begin importing or exporting the
operating parameters.
 CANCEL CHANGES Will cancel all changes and exit from JOB
SETUP back to the previous mode.
 USE NEW SETTINGS Will save any changes to the configuration
file before exiting.
 HELP
Will open on-line help.
General field/form navigation guide
 Press Up/Down arrow keys to move between fields.
 Use keypad to enter numeric values within each field.
 Press ENT to confirm the entry within a field.
 Press USE when form is completed and save settings to the form.
 Press USE NEW SETTINGS to return to the INFO screen.
To access the JOB SETUP menu:
Press the INFO soft key.
Press the JOB SETUP soft key.
The cursor will default to the first selection on the
menu: TOOL TABLE
Fig. I.60 JOB SETUP screen in milling