14 Translation of the original instructions / Small animal clipper
6.1.3 Fitting the clipperhead
1. If the blade hinge (2) is acciden-
tally closed, lift the latter up using
a screwdriver (1) while simultane-
ously pressing the blade lock.
Fig. 14
2. Fit the clipperhead (1) on the open
blade hinge (2).
Fig. 15
3. Fold the clipperhead (2) by light
pressure on to the clipper (1)
which is switched on.
Fig. 16
4. Make sure, that the clipperhead (1)
is engaged rmly.
Fig. 17
NOTE!
For proper operation make sure that the clipperhead (1) is engaged correctly.
6.2 Activities during operation
6.2.1 Clipping
1. Fix and calm the animal suciently before clipping.
2. Switch on the clipper already in the eld of vision of the animal.
3. Approach to the animal from ahead.
4. During clipping, look at the behaviour of the animal.
To Next Page
Loading...
