Press the Power On/Off button (1), the End Of Programme Indicator (7) will illuminate.
Select the programme most suitable for your dishes using the Programme Selection button (3).
The Programme Display (2) will show the number of the selected programme.
Additional features can be selected.
Half load function
Press the Half Load button (4) to reduce the duration of your selecte programme, and therefore
decrease your energy and water consumption.
NOTE (only for models with extra features): If an extra feature (4) is used on the most recent
wash programme, the feature will remain active on the next programme. To cancel this feature on
the newly selected programme, press the relevant feature button until the light on the button
switches off.
NOTE: If you decide not to start the selected programme, please see the "Changing a
Programme" and "Cancelling a Programme" sections.
NOTE: When there is not enough dishwasher salt, the Salt Lack Warning Indicator (7) will
illuminate to indicate the salt chamber needs filling.
NOTE: When there is not enough rinse aid, the Rinse Aid Lack Warning Indicator (7) will
illuminate indicating the sal chamber needs filling.
Delaying the Programme
Press the Delay button (5) to delay the start time of the selected programme by 3, 6 or 9 hours.
Pressing the button once delays the start time by 3 hours, pressing twice by 6 hours, and pressing
a third time by 9 hours. The programme can be selected first and the delay duration after, or vice
versa. Press the Delay button to change or cancel the delayed start. The remaning delay time will
show on the display and the corresponding Delay Indicator will be illuminated (3h, 6h, or 9h).
Changing a Programme
NOTE: Open the door slightly at first to avoid water spillage if you wish to stop the wash
programme before it is complete.
To Next Page
Loading...
Need help?
General
