Heinner HDW-BI4506A++ - Automatic Fault Warnings; Error Code Explanations

www.heinner.com
20
AUTOMATIC FAULT WARNINGS AND WHAT TO DO
TROUBLE CODE
POSSIBLE FAULT
WHAT TO DO
Wash
End
Start/
Pause
Insufficient water
Make sure the water inlet tap is open and water is flowing.
Separate the inlet hose from the tap and clean the filter of the hose.
Contact for service if the error continues.
Continuous water input
Close the tap and contact for service.
Inability to discharge water
Water discharge hose and filters may be clogged.
Cancel the program.
If the error continues, contact for service.
Contact for service.
Faulty heater and heater sensor
Contact for service.
Overflow
Unplug the machine and close the tap.
Contact for service.
Faulty electronic card
Contact for service.