EasyManua.ls Logo

Heinner HDW-BI4506A++ - Drain Hose and Electrical Connections; Drain Hose Connection; Electrical Connection Requirements

Heinner HDW-BI4506A++
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.heinner.com
7
Drain hose
Connect the water drain hose directly to water drain hole or to the sink outlet spigot. This
connection should be minimum 50 cm and maximum 110 cm from flor plane.
IMPORTANT: Items will not wash properly if a drain hose longer than 4 m is used.
Electrical connection
WARNING: Your machine is set to operate at 220-240 V. If the mains voltage supply to your
machine is 110 V, connect a transformer of 110/220 V and 3000 W between the electrical
connection.
The earthed plug of the machine must be connected to an earthed outlet supplied by suitable
voltage and current.
In the absence of earthing installation, an authorised electrician should carry out an earthing
installation. In the case of use without earthing installed, we will not be responsible for any loss
of use that may occur.
The indoor fuse current value should be 10-16 A.

Related product manuals