1. When the machine isn’t in operation:
• Disconnect the plug and close the tap.
• Leave the door slightly open to prevent odour formation.
2. Select the dry option to remove water droplets.
3. Place dishes in the machine properly to achieve the best energy consumption, washing
and drying performance. Please see the programme and consumption table for more
information.
4. Rinse dirty dishes before placing them in the dishwasher.
5. Only use the Prewash programme when necessary.
6. Do not place the machine near a refrigerator because it will reach high temperatures.
7. If the machine is located in an area that is at risk of freezing, close the tap, disconnect the
inlet hose from the tap and drain the water inside the hose and the machine completely.
To Next Page
Loading...
