What to do if the waste water in the Heinner HDW-FS4505WA++ cannot be discharged?
If the waste water in your Heinner Dishwasher cannot be discharged, it may be because the water discharge hose is clogged or the filters of your machine might be clogged. Power off-on your machine and activate the program cancellation command. If the error continues, contact the service.
What to do if the Heinner HDW-FS4505WA++ control lamps won’t go out after a wash operation?
If the control lamps won’t go out after a wash operation of your Heinner Dishwasher, it means that the Power On/Off button is released yet.
Why is there inadequate water supply in my Heinner HDW-FS4505WA++?
If there is inadequate water supply in your Heinner Dishwasher, make sure the water input tap is fully open and there is no water cut. Close the water input tap, separate the water input hose from the tap, and clean the filter at the connection end of the hose. Restart your machine, contact the service if the error resumes.
What to do if detergent residues are left in the detergent compartment of my Heinner HDW-FS4505WA++ Dishwasher?
If detergent residues are left in the detergent compartment of your Heinner Dishwasher, it means that detergent has been added when the detergent compartment was wet.
Key considerations for safe and correct machine installation.
Guidelines and warnings for using the dishwasher in daily operation.
Procedures and advice for dealing with machine malfunctions.
Guidance on selecting a suitable location and placing the dishwasher correctly.
Instructions for connecting the water inlet hose to the tap.
Instructions for connecting the water outlet hose to the drain.
Details on connecting the dishwasher safely to the power supply.
Troubleshooting steps when the wash program fails to start.
General| Type | Freestanding |
|---|---|
| Capacity | 12 place settings |
| Energy efficiency class | A++ |
| Noise level | 49 dB |
| Number of programs | 6 |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
To Next Page