www.heinner.com
23
FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE
• Make sure the water input tap is totally open and that there is
no water cut.
• Close the water input tap, separate the water input hose from
the tap and clean the filter at the connection end of the hose.
• Restart your machine, contact the service if the error resumes.
Error of continuous
water input
• Close the tap.
• Contact service.
The waste water in
the machine cannot
be discharged.
• Water discharge hose is clogged.
• The filters of your machine might be clogged.
• Power off-on your machine and activate the program
cancellation command.
• If the error continues, contact the service.
Alarm is active against
water overflow
• Power off your machine and close the tap.
• Contact service.
Overheating error
(temperature in
the machine is
too high)
To Next Page
Loading...
Need help?
General
