Heinner HDW-FS6006DSA++ - VIII. TROUBLESHOOTING; FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE

www.heinner.com
23
FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE
ERROR
CODE
ERROR
DESCRIPTION
CONTROL
F5
Inadequate water
supply
• Make sure the water input tap is totally open and that there is
no water cut.
• Close the water input tap, separate the water input hose from
the tap and clean the filter at the connection end of the hose.
• Restart your machine, contact the service if the error resumes.
F3
Error of continuous
water input
• Close the tap.
• Contact service.
F2
The waste water in
the machine cannot
be discharged.
• Water discharge hose is clogged.
• The filters of your machine might be clogged.
• Power off-on your machine and activate the program
cancellation command.
• If the error continues, contact the service.
F8
Heater error
• Contact service.
F1
Alarm is active against
water overflow
• Power off your machine and close the tap.
• Contact service.
FE
Faulty electronic card
• Contact service.
F7
Overheating error
(temperature in
the machine is
too high)
• Contact service.
F9
Divisor position error
• Contact service.
F6
Faulty heater sensor
• Contact service.
VIII. TROUBLESHOOTING