Fall and injury hazard!
•
Do not climb on your machine. The upper table
of your machine may break and you might get injured.
•
Tidy the hose, cable and packaging of your
machine during installation. You might trip over and fall.
•
Do not turn your machine upside down, or on its side.
•
Do not lift your machine by holding it from
extruding parts (detergent drawer, door). These parts might break and
cause you to get injured.
•
There’s the risk of tripping and injury if the materials like hose and cables
are not properly stored after your machine is installed.
Machine must be carried by 2 people or more.
To Next Page
Loading...
