CHAPTER -3: INSTALLATION
(WATER DISCHARGE CONNECTION)
• The end of water discharge hose can be
fitted to a specific apparatus directly attached to dirty
water discharge hole or
outlet joint of the basin elbow.
• Never attempt to extend the water discharge
hose by jointing.
• Do not put discharging hose of your machine
in a vessel, bucket or sink.
• Make sure that the water discharge hose
does not bend, buckle, be crushed or extended.
Please note:
• The water drain hose should be mounted
at a height of minimum 60 cm, maximum 100 cm
from the ground.
To Next Page
Loading...
