Heinner HWM-6120 User Manual

CHAPTER -9: TROUBLESHOOTING
All repairing operations required for your machine should be carried out by our
authorised service. If your machine requires a repair or if you cannot remove the
fault by the help
of the information provided as follows:
• Unplug your machine.
• Turn the water faucet off.
FAULT POSSIBLE CAUSE TROUBLESHOOTING
Your
machine
does
not start.
It is not plugged.
Plug it.
Fuse blown.
Replace the fuses.
Electricity cut-off.
Check mains power.
Start/pause button
not pressed.
Press on Start/
Pause button.
Programme dial
‘stop’ position.
Switch the programme
button to the desired
position.
The machine door is
not completely closed.
Close the machine
door.
Your
machine
does
not intake
water.
Water tap is turned off.
Turn your faucet on.
Water inlet hose
may be twisted.
Check water inlet
hose and untwist.
Water inlet hose
clogged.
Clean water inlet hose
filters. (*)
Valve inlet filter
clogged.
Clean the valve
inlet filters. (*)
The machine door
is not completely
closed.
Close the machine
door.
(*) See the chapter regarding maintenance and cleaning of your machine.
www.heinner.com
62/74

Heinner HWM-6120 Specifications

General

Brand	Heinner
Model	HWM-6120
Category	Washer
Language	English