CHAPTER-5: PRELIMINARY PREPARATION FOR
LAUNDERING (CHILD LOCK)
To avoid programme flow from being affected if programme buttons are
pressed or programme button is turned when performing washing operation in
your machine, child lock is available.
Child lock will be activated in case pressed on both auxiliary functions 3 and 4
at the same time for more than 3 seconds. You can see the auxiliary function
leds on the display when activated.
If pressed any button while child lock is active, the Additional Function Leds
will blink on the display.
If while the child lock is engaged and any programme is running, the
programme knob is switched to the CANCEL position and another programme
is selected, the programme previously selected continues from where it left.
To deactivate it, it will be sufficient to press on the same buttons for more than
3 seconds. When the child lock is deactivated, the Additional Function Leds
will blink on the display.
To Next Page
Loading...
Need help?
General
