CHAPTER -10: AUTOMATIC FAULT WARNINGS AND WHAT
TO BE DONE
Your machine is equipped with the systems which are capable of both taking
necessary precautions and warning you in case of any breakdown by means of
continuous self-checking during washing operations.
TROUBLE
CODE
POSSIBLE
FAULT
WHAT TO DO
The door of
your machine
is left open.
Close the machine door. If your
machine persists to indicate fault,
turn off your machine, unplug it
and contact the nearest
authorised service immediately.
The pump is faulty
or pump filter is
clogged or
electrical
connection
of the pump is
faulty.
Turn on the faucet. Mains water
may be cut-off. If the problem still
continues, your machine will stop
after a while automatically. Unplug
the machine, turn off your faucet
and contact the nearest
authorised service.
The water
pressure or the
water level inside
the machine is low.
Clean the pump filter. If the
problem persists, contact the
nearest authorised
service. (*)
Your machine
has excessive
amount of
water.
Your machine will discharge
water by itself. Pursuant to
discharging operation, turn off your
machine and unplug it. Turn off
your faucet and contact the nearest
authorised service.
(*) See the chapter regarding maintenance and cleaning of your machine.
To Next Page
Loading...
Need help?
General
