Heinz Walz IMAGING-PAM User Manual

CHAPTER 12 TECHNICAL SPECIFICATIONS
198
(instead of camera objective accessory
detector filter RG645, 3 mm and short-pass
interference filter λ < 770 nm). Featuring
alternative detector filters for green or red
fluorescence (special green filter set 500 -
575 nm and red filter RG665, 3 mm with
short-pass interference filter λ < 770 nm).
12.3.7 K7-MIN/M and K6-MIN/M
Design: devices for mounting camera IMAG-K6 or
IMAG-K7 to the Imaging MINI-Heads
Weight: 166 g
12.3.8 IMAG-S
Design: Fine drive laboratory stand with high
performance rack-and-pinion drive (50 mm
traverse path) for adjustment of working
distance; platform base with covered 9.3
cm central hole for mounting optional
sample holders
Weight: 3.34 kg
12.3.9 IMAG-MIN/ST
Design: Fine drive tripod adapter for mounting a
MINI-Head onto a tripod head with UNC
1/4-20 screw threads, High perfomance
rack-and-pinion drive (120 mm traverse
path) for adjustment of working distance

Heinz Walz IMAGING-PAM Specifications

General

Category	Measuring Instruments
Manufacturer	Heinz Walz GmbH
Type	IMAGING-PAM
Camera Type	CCD Camera
Software	ImagingWin
Application	Photosynthesis Research, Plant Physiology
Measurement Principle	Pulse Amplitude Modulation (PAM) fluorometry
Excitation Light Sources	LEDs with various wavelengths
Detector	High-sensitivity CCD
Spatial Resolution	Depends on camera and lens configuration
Image Resolution	Up to 1392 x 1040 pixels
Measurement Parameters	Chlorophyll Fluorescence
Features	Real-time imaging