EasyManua.ls Logo

HELI CPCD140 - Page 5

HELI CPCD140
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
(10) Never permit anyone to stand or walk under upraised forks.
(11) Don’t operate truck and attachment of it at any position out of the drive seat.
(12) On the high lift forklift truck, when the lift high more than 3m, it is noted that the
goods on it should not fall down or the protection measures must be taken if
necessary.
(13) Tilt the mast of the high lift forklift truck as backward as possible while the truck
working. Use minimum forward tilt angle and Min. reverse tilt when loading and
unloading.
(14) Be careful and slowly driving over a dockboard or bridge-plate.
(15) Shut down the engine and don’t stay on the truck when filling fuel. Don’t ignite
the engine while checking battery or fuel lever.
(16) The unloaded forklift truck with attachments should be operated as a loaded
truck.
(17) Don’t handle unfixed stacked goods.Be careful to bulky goods to be handled.
(18) If leaving the truck, lower the forks on the ground and let the shift lever to
neutral, shut down the engine or cut down electric supply. If parking on a slope is
unavoidable, apply the parking brake and block the wheels.
(19) Don’t open the radiator cap when the engine is worm.
(20) Don’t adjust the control valve and relief valve at will to prevent the damage of
hydraulic system and its components because of excessive pressure passing them.
(21) During loading and unloading operations, adjustment of parts, overhauling or
maintenance are strictly forbidden;
(22) Sudden quick turning is strictly forbidden for a going forklift;
(23) When mast leans forward, cargo lifting and driving lifting with fork are strictly
forbidden.
5. Points for attention on use of cooling system
(1) The cooling medium used for the radiator of the forklift of our company is

Related product manuals