Step 11:
Install Bottle Cages:
Takeonebottlecageandndtwo(2)bottlecagebolts.Alignthebottle
cage holes with the screw holes on either side of the upright. Install and
tighten two bottle cage bolts. Do not over tighten. Repeat the process for
the second water bottle.
3/ ASSEMBLY
- 14 -
Step 12:
Installing Batteries:
Remove the cover to the battery compartment by pressing in the tab by
the arrow shown above. Install batteries according the + / - indicators
in each battery slot as shown above. NiMH rechargeable batteries are
recommended.
A5-HLT3500.indd 14 14/12/2012 19:48