Need help?Do you have a question about the Hellenbrand ProMate-6 and is the answer not in the manual?
General| Brand | Hellenbrand |
|---|---|
| Model | ProMate-6 |
| Category | Water Dispenser |
| Language | English |
Specifies minimum/maximum operating pressures and temperatures for the system.
Details meter accuracy, flow rates, and physical dimensions like drain line.
Explains the three-step process of oxidation, precipitation, and mechanical filtration.
Describes how the aeration system introduces and replenishes air within the tank.
Details the aeration control center and air recharge frequency guidelines.
Provides recommendations for backwash frequency based on iron concentration levels.
Illustrates the IC-2.0 assembly with a detailed parts list for identification.
Explains the functionality and operation of the bypass valve in various modes.
Addresses iron, manganese, and sulfur odor bleed-through, and water effervescence.
Solutions for loss of pressure and air spurting from fixtures.
Resolves continuous drainage from controls or tubes and blue-green staining.
To Next Page
