Need help?Do you have a question about the Hellenbrand E3 and is the answer not in the manual?
General| Brand | Hellenbrand |
|---|---|
| Model | E3 |
| Category | Water Dispenser |
| Language | English |
Explains hardness, its measurement, and the regeneration process to remove it.
Advises on maintaining the correct salt level and type for softener efficiency.
Specifies hardness, iron limits, temperature, and disinfection needs for proper operation.
Lists essential checks for water pressure, quality, electrical, plumbing, and bypass valve.
Guides on setting the time of day and configuring hardness and regeneration parameters.
Details setting day override and specific regeneration times for optimal performance.
Illustrates and explains Normal, Bypass, Diagnostic, and Shut Off modes for the valve.
Step-by-step guide for initial setup, including plumbing connections and regeneration cycles.
Explains how to navigate and interpret the control panel displays for system status.
Details how to initiate manual regeneration cycles for increased water usage or immediate needs.
Covers salt usage, type, and the procedure for cleaning the brine tank to ensure efficiency.
Provides instructions on disinfecting the softener using bleach and the correct dosage.
Outlines the procedure for draining the softener using compressed air for winter protection.
Solves problems related to stalled regeneration, non-regeneration, and control valve errors.
Addresses issues like hard water, salty water, iron, and loss of water pressure.
Guides on fixing absent/flashing displays, incorrect time, and regeneration timing errors.
To Next Page
