HELLER ACKM68RC User Manual

Timer-setting
Example: set an operation after 9.5 hours
Timer mode
It is convenient to set the timer on with TIMER button when you go out in the morning
to achieve a comfortable room temperature at the time you get home. You can also set
timer off at night to enjoy a good sleep.
Setting a switch-on
timer when the
appliance is off.
Setting a switch-off timer
during operation.
Press the TIMER button, "h" flashes on the LCD, then you can set the time.
Each time the or button is pressed,
If the desired time is within 10 hours, the set time increases or decreases by 0.5 hour;
If desired time is beyond 10 hours, increases or decreases by 1 hour.
The range can be set is 0.5 hour to 24 hours.
Set desired operating mode, temperature setting and indoor fan speed firstly,
then press the TIMER button and "h" flashes on LCD.
Point the remote control at the signal receptor of the indoor unit,
press the or button when "h" flashes. Choose the timer you want ,
then press the TIMER button.
A "beep" can be heard.
Timer indicator on the indoor unit lights up.
"h" stops flashing.
To cancel the set timer: press the TIMER button again, a "beep" can be heard
and the timer indicator on the indoor unit lights off.
1
3
2
10
Operation instructions
LowLow
HighHigh
h
LowLow
HighHigh
h
LowLow
HighHigh
As time goes by, LCD on remote controller only displays the remained time instead of
set temperature.
The previous set time is stored and the next set time begins with the previous setting.
On- timer and off-timer can not be set at the same time.
The room may not reach your desired temperature within the preset time because of
different size of room.
SLEEPSLEEP
LowLow
HighHigh
hh
MODEMODE
TIMERTIMER
SUPERSUPER
SMARTSMART
FANFAN
SWINGSWING
1
2
2

HELLER ACKM68RC Specifications

General

Brand	HELLER
Model	ACKM68RC
Category	Air Conditioner
Language	English