1RUPDO
Fuzzy: set the water level automatically according to the load of clothes
Normal: regular washing
Use this button to turn the washing machine on and off. If a set program
is not started within 5 minutes of turning the machine on, it will switch off
automatically.
Press this button to begin a wash program, or to pause / resume a
program that is currently in progress
Press this button repeatedly to set the desired wash program. You can
choose from the following options.
Press this button repeatedly to choose the required washing temperature.
You can select Cold, Warm or Hot.
If the hot value is not connected, please do not select hot or warm model.
The default warm temp is 35 dergee, and the hot model one is 45 degree.
Press this button repeatedly to choose Soak, Wash, Rinse and Spin.
Use this button to program a delay start to the wash cycle.Each pressing
can increase 1 hour for presetting time, and hold this button,time will
increase rapidly.
Heavy: to wash the coverlet, jeans and other big clothes
Air dry: to dry the tub
Gentle: for washing of wool or underwear
Speedy: to wash the slight dirty clothes
Use these buttons (Preset & Water temperature) simultaneously to
activate and deactivate the safety lock.
Use this button to select the appropriate water level according to the
volume of laundry.
A long pressing on “Water Level” will re-supply water untill the hand goes or the water level
reaches the warning level.
The user can not adjust the water level under Speedy or Air dry
Control Panel
To Next Page
Loading...
