INSTALLATION
WARNING: Before using this unit, please keep it upright at least 2 hours.
The unit can be moved easily among the rooms, but please note the following:
1. Assemble hose adaptor (Figure 1).
a. Prepare the separate parts of the hose adaptor (Part A & Part B); they are almost same on
the structure.
b. With each hand, hold one part so you can connect them easily.
Remarks: Don’t push too hard when connecting together, to prevent damage.
2. Assembly of the exhaust hose (Figure 2).
a. Lengthen one head of the hose; screw it into the unit anti-clockwise.
Remarks: Screw it to its place, no less than three circles.
b. The same way to connect the hose to the assembled adaptor (At least three circles).
To Next Page
Loading...
