EasyManua.ls Logo

HELLER HYAC15 - Controls and Settings

HELLER HYAC15
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Important Safeguards
The length of the outlet hose is from 280mm to 1500mm which bases on the unit. The air-exhaustion
must be well ventilated, if not, may cause the unit to overheat.
NOTE: Always use the hose that comes with the unit, any other hose that is not compatible with the unit
will overheat the unit.
CONTROLS & SETTINGS
This unit HYAC15 (Cooling model only) has two functions: cooling and fan.
Fan has three speeds: high speed, middle speed and low speed.
Setting temperature is 18°C-30°C
24 Hours timer
Sensor
Water-level protective function
1. Control Instructions
Control Panel:
a. When plug in, follow the start music, unit is in standby status. Digital screen will indicate
temperature (Range: 5°C-35°C/41°F-95°F), if ambient temperature above 35°C, screen will show
“H”. If it is below 5°C, it will indicate “L” and the unit will enter standby status.
b. button:
When pressing this button, the model will enter cooling mode (Setting temperature 24°C/75°F),
high speed fan. Press again, the unit will shut off and play shut-off music.
c. :
Press this key to choose Cooling and Fan mode.

Related product manuals