HelloBaby HB40 - Temperature Alarm Setting; Set Temperature Hi;Lo Alert Limits; Lullaby Setting; Feeding Timer

6
8.4.1 TEMPERATURE ALARM SETTING
1. Press the ◀/▶/▲/▼ key to select for turning on alarm function; Press key
to confirm;
2. Press the ◀/▶ / ▲/▼ key to select for turning off alarm function; Press key
to confirm;
8.4.2 SET TEMPERATURE HI/LO ALERT LIMITS
1. Press ▲/▼ to select or for Hi/Lo limits settings;
2. Press ◀/▶ keys to adjust the Hi limit whenis selected;
3. Press ◀/▶ keys to adjust the Lo limit whenis selected;
The high temperature alarm default setting is 36 ℃,and the low temperatureNote:
alarm default setting is 8℃.Whenthetemperaturegoesaboveorbelowthesettings,the
temperatureiconturnsred. It will alert user by beeps. Press any key on the parent unit to
stop beeping and flashing.
8.5 LULLABY SETTING
You can soothe the baby to sleep by playing a gentle lullaby from the Camera unit.
1. Press the MENU key and the menu will pop up.
2. Press the◀/▶/▲/▼ keys until the lullaby iconis selected by orangebox;
3. Press the key enter into sub-menu;
4. Press the◀/▶/▲/▼key to select one of the 8 available lullabies, you can pick single
playback, loop (all 8 lullabies) playback or stop .
5. Presskey to confirm.
The lullaby default setting is OFF.Note :
8.6 FEEDING TIMER
1. Press the MENU key and the menu will pop up.
2. Press the ◀/▶/▲/▼ key until the alarm iconis selected by orangebox.
3. Press the key enter into sub-menu, Press the◀/▶/▲/▼key to selected the
alarm time you need;
 4. Presskey to confirm;
5. Presskey to Exit.
The minimum unit is 0.5 hour. The maximum setting is 7 hours (9 levels).Note 1:
Once the alarm is turned on, alarm icon will display on the screen;Note 2:
The alarm default setting is OFF.Note 3:
When the alarm is ringing, press any key on the parent unit to turn the alarm off.Note 4:
If you don't turn off the alarm, the alarm will ring for 1 minute. After three minutes Note 5:
the alarm will ring again for 1 minute. The alarm will ring for three times in total, after this
the alarm goes off.
8.7 SLEEP MODE
This mode allows you to control the sound activation of your baby unit. If there is no sound
around the baby unit within 30 seconds, it will stop audio transmission and turn off the
screen of the parent unit. When the baby unit detects any sounds louder than the sensitivity