HelloBaby HB40 - Date Setting; Time Setting

7
level, it will start transmitting the signal to the parent unit again and turn on the screen of the
parent unit. To change the VOX level, please follow the below instructions.
1. Press the MENU key and the menu will pop up.
2.Press the◀/▶/▲/▼key until the VOX icon is selected by orangebox.
3.Press key enter into sub-menu, then press◀/▶/▲/▼ key to select desired level;
4. Press keytoconfirm;
5.PresskeytoExit.
is Low sensitivity level, the baby have to make a lot of sound before the VOX Note:
function will be activate;
is middle sensitivity level; Note:
is High sensitivity level, the baby don't have to make a lot of sound before the VOX Note:
function will be activate;
8.8 DATE SETTING
1. Press the MENU key and the menu will pop up.
2. Press the◀/▶/▲/▼ keys until the date iconisselectedbyorangebox;
3. Press key to enter into sub-menu, then press ▲/▼ key to select the Year, Month
and Day setting;
4. Presskeyto+ or - to set your expected Month, Day and Year;
5.Press keytoExit.
. 8 9 T SETTING IME
1. Press the MENU key and the menu will pop up.
2. Press the◀/▶/▲/▼ keys until the time iconisselectedbyorangebox;
3.Press the◀/▶ keysto 12H or 24H to select the time style. If select 12H, you need select
AM or PM;
4. Pressthe◀/▶+ or - to set the Hour;
5. Pressthe◀/▶ + or - to set the Min.
1