What does E08 error mean on HemoCue Measuring Instruments?
The E08 error on your HemoCue Measuring Instruments indicates a light blocking item in the cuvette holder. Ensure that the analyzer and microcuvettes are used according to the HemoCue Hb 201+ operating manual and instructions for use. If the problem persists, the analyzer needs service; contact your distributor.
What does E07 error mean on HemoCue Measuring Instruments?
The E07 error code on your HemoCue Measuring Instruments indicates low battery power. Replace the batteries with 4 type AA, 1.5 V batteries, or use the mains power supply.
What does E06 error mean on HemoCue Measuring Instruments?
The E06 error on your HemoCue Measuring Instruments signifies an unstable blank value, possibly because the analyzer is cold. Turn off the analyzer and allow it to reach room temperature. If the problem persists, the analyzer requires servicing; contact your distributor.
What does E00 error mean on HemoCue Measuring Instruments?
The E00 error code on your HemoCue Measuring Instruments indicates either a faulty cuvette or a circuit board issue. First, check the expiry date of the microcuvettes and try a new one. If the problem continues, the analyzer needs service; contact your distributor.
Provides a general introduction and overview of the HemoCue Hb 201+ Analyzer's capabilities and intended use.
Lists and illustrates all components included with the HemoCue Hb 201+ system.
Instructions for powering on the analyzer and configuring settings like audio, date, and time.
Step-by-step instructions for collecting and preparing capillary blood samples for analysis.
Procedures for collecting and preparing venous or arterial blood samples for measurement.
Instructions for executing quality control tests on the HemoCue Hb 201+ Analyzer.
How to view, manage, and delete measurement results stored in the analyzer's memory.
Instructions for connecting the HemoCue Hb 201+ Analyzer to a PC or printer.
Guides for performing daily cleaning of the analyzer and its optical components.
Steps to resolve errors like E00-E35, HHH, display faults, and incorrect character displays.
Resolving issues with out-of-range results, control materials, and patient sample readings.
Key technical data, measuring range, limitations, and essential performance of the HemoCue Hb 201+.
Information regarding electromagnetic immunity and emission standards for the HemoCue systems.
Explanation of various symbols and notations found throughout the operating manual.
Contact information and address for HemoCue AB, the manufacturer of the analyzer.
General| Sample Volume | 10 µL |
|---|---|
| Calibration | Factory calibrated |
| Display | LCD |
| Measurement Principle | Photometric |
| Measurement Range | 0–25.6 g/dL |
| Operating Temperature | 15–30 °C |
| Storage Temperature | 0–50 °C |
| Power Supply | 4 x AA batteries or AC adapter |
| Weight | 350 g (with batteries) |
| Precision | < 1.5% CV |
| Measuring Time | Approximately 1 minute |
| Power | 4 AA batteries |
| Data Storage | 600 results |
| Connectivity | Not available |
To Next Page
