Hendi HendiChef IPC - Control Panel - Rotary Knob and Display; Rotary Knob Operations; Time and Temperature Displays; Speed and Reverse Controls

13
EN
Clean the main unit.
6. Control panel overview
Number Icon Function description
12
Rotary knob
1. Can be used to setting temperature, time, speed; or UI, Auto program, recipe.
2. Press the knob and the cooker will suspend when cooking. It will continue cooking
if your press again. Or confirm your choice.
3. Long push the knob and the cooker will stop cooking.
4. Press the knob after finish all setting and the cooking will start cooking.
5. It will automatically cancel if you long push the knob during setting.
6. When finish cooking, Press the knob and the cooker will into standby mode.
27.1
Reverse
The speed rang: 1-3
27.2
Speed: Click , to shift between clockwise and reverse.
Speed range:
Range: 1-3
Range: 1-4
Range: 1-12
Slide the picto or rotate the knob to set the speed
26
Display set time parameter: 0-90 minute
Operation time display: 0-90 minute
Click and set min or sec, slide or rotate the knob to set time.
25.1
Display set temp parameter.
After setting 37° next value is 40°, in intervals of 5°.
Click and slide the picto or rotate the knob to set the temp
25.2 Close/Open Icon
25.3 Food /ingredients temp. After 37° next value is 40°, in intervals of 5°.