17
EN
9. Care and cleaning
• Always switch off and unplug power cord before
cleaning. Please use dry and soft cloth to clean
power cord.
• Remove the lid and tool from the bowl before
cleaning.
• Power unit wipe with a damp cloth, then dry.
Never use abrasives or immerse in water. Do
not wash them with water or put it into the
dish-washing machine.
• Blender jug can be washed by dry dishcloth or
wash it with water, but do not immersed in water.
Do not put it into the dish-washing machine.
• When there is burn mark on blender jug bottom,
put some citric acid or lemons into water, heat 5~7
minutes, then remove the burn mark with a mop.
• Bowl/stirring/paddle/blade: Wash the parts, then
dry thoroughly. If food sticks or burns on the in-
side of the bowl, remove as much as possible
using a spatula. Fill the bowl with warm soapy
water and allow to soak. Remove any stubborn
deposits using a cleaning brush. Any discoloura-
tion of the bowl will not affect its performance.
• Lid, Measuring cup, Blade, Mixing paddle, Steam
basket, Steamer. etc. all above photo accesso-
ries can be washed by dish-washing machine.
Metal brush, nylon brush, household cleaner, dilu-
ent, cleaning products will damage the surface of
product structure.
How to take out steam basket:
Put mearsuring cup into steam basket slot and ro-
tate to fix. Then, take out.
To Next Page
Loading...