SYSTEM 1000 General Description
The SYSTEM 1000 meter, mix, and dispense machine is a ratio proportioning pump designed
specifically to meter two liquids or pastes in a precise ratio. The volumetric positive displacement
piston pump referred to as the Posiload pump is a unique development in the course of pump
design, and because of the ability to interchange pump metering tubes from 10 mm to 55 mm in
0.001 mm increments, allows the selection of many fixed ratios.
The Posiload pump can be used for transfer of precise ratios, metering to a hand held or fixed head
mixer, or injection of the metered materials through a mixer into open or closed molds.
The complete system is totally enclosed and mixing of the liquids only takes place at the final
stage of the equipment within the mixing chamber. Flushing is achieved by an air and solvent
purge system or with one material component with a secondary component bypass.
It is recommended that this manual be read thoroughly by all personnel charged with the
responsibility of operating, maintaining, or cleaning the equipment.
CAUTION
Due to the precise nature of the SYSTEM 1000, we recommend consulting
Henkel’s technical service department
@ (800) LOCTITE before making any major adjustments.
To Next Page
Loading...
