Need help?Do you have a question about the Henkel LOCTITE EQ RC15 and is the answer not in the manual?
General| Brand | Henkel |
|---|---|
| Model | LOCTITE EQ RC15 |
| Category | Controller |
| Language | English |
Explains warning, caution, and note symbols used throughout the manual.
Lists all components included with the EQ RC15 Pump Controller package.
Details crucial safety precautions for handling chemicals and the equipment.
Specifies the intended use and limitations of the RC15 controller.
Explains the fundamental working principles of the RC15 pump controller.
Describes the three available operating modes: Quantity, Time, and Start/Stop.
Details the touch screen interface, its operation, and display settings.
Explains icons indicating device and dosage status during operation.
Illustrates symbols for various operating modes and functions of the controller.
Shows symbols related to tank filling status and pressure readings.
Details symbols used to represent adjustable parameters in settings menus.
Describes the main operational screen layout and its display elements.
Explains the interface for entering numerical values via the keypad.
Details the screen for accessing advanced configuration options.
Describes the screen for expert-level device configurations and settings.
Identifies and explains the various connectors located on the rear of the unit.
Lists specifications such as temperature, humidity, power, and air supply requirements.
Provides physical dimensions and clearance requirements for the unit.
Specifies requirements for the operating environment and conditions.
Instructions for physically connecting the device and its components.
Guides on how to modify numerical parameters using the interface.
Explains how to input and permanently save configuration settings.
Provides a step-by-step guide for initial device installation and setup.
Details how to choose and set the desired dispensing operating mode.
Explains the use and management of multiple dosing programs.
Guides on calibrating the pump for accurate volume and flow rate measurements.
Describes how to activate and use the syringe level monitoring feature.
Instructions for securing parameters with a PIN code.
Explains how to disable PIN code protection permanently.
Details how to set a custom password for enhanced security.
Outlines maintenance requirements and cleaning procedures for the unit.
Provides solutions for common malfunctions and error codes.
Details the pinout and function of the XS1 START interface connector.
Explains the XS2 interface for connecting product reservoirs.
Describes the XS10 interface for PLC and robot integration.
Presents the manufacturer's declaration of compliance with EC regulations.
To Next Page
