ADLY MOTO
1-13
Engine running not smooth with middle ~ high RPM
Check ignition timming (with timming
light)
CDI defect
correct
Incorrect ACG defect
Check fuel flow Low fuel level
well
Poor Tube and fuel filter blocked
Fuel tank cap is blocked
Check carburetor nozzle blocked or not ? Cleaning
not blocked
Blocked
Remove starter plunger wire and check Connection wire is bad
with resistance No resistance Plunger defect
Connect starter plunger with 12V battery
for 5 Min. tubing pipe with fuel-adding
return, yhen blow it
Blowing
Plunger defect
not blown
To Next Page
